| Xoffset | xo, x | Centers the offset on the x axis |
| Yoffset | yo, y | Centers the offset on the y axis |
| Zoffset | zo, z | Centers the offset on the z axis |
| ForwardOffset | foffset, fo | Centers forward and backward offset, based on the caster's viewing angle |
| SideOffset | soffset, so | Centers left and right offset, based on the caster's viewing angle |
| Rotatex | rotx | Rotation on the x axis |
| Rotatey | roty | Rotation on the y axis |
| Rotatez | rotz | Rotation on the z axis |
| Coordinatex | cx | Sets the x axis coordinate |
| Coordinatey | cy | Sets the y axis coordinate |
| Coordinatez | cz | Sets the z axis coordinate |
| BlockTypes | blocktype, bt | Only targets selected block types. Multiple blocks can be listed by separating them using a `,`<br>You can add a `#` at the front of the type to indicate that the block only needs to match part of the type, add `@` to indicate that the block only needs to match the start of the type |
| BlockIgnores | blockignore | Excludes selected block types from the targeter. Multiple blocks can be listed by separating them using a `,` |
| CoordinateYaw | cyaw | Sets the yaw value |
| CoordinatePitch | cpitch | Sets the pitch value |
| blockCentered | | Boolean value. If set to true, the center of the block at the target location will be targeted, instead of the target location itself |
| ignoretranslucent | it | Boolean value. If set to true, no translucent blocks will be targeted |
| xoffset | xo, x | Centers the offset on the x axis |
| yoffset | yo, y | Centers the offset on the y axis |
| zoffset | zo, z | Centers the offset on the z axis |
| forwardOffset | foffset, fo | Centers forward and backward offset, based on the caster's viewing angle |
| sideOffset | soffset, so | Centers left and right offset, based on the caster's viewing angle |
| rotatex | rotx | Rotation on the x axis |
| rotatey | roty | Rotation on the y axis |
| rotatez | rotz | Rotation on the z axis |
| coordinatex | cx | Sets the x axis coordinate |
| coordinatey | cy | Sets the y axis coordinate |
| coordinatez | cz | Sets the z axis coordinate |
| blocktypes | blocktype, bt | Only targets selected block types. Multiple blocks can be listed by separating them using a `,`<br>You can add a `#` at the front of the type to indicate that the block only needs to match part of the type, add `@` to indicate that the block only needs to match the start of the type |
| blockignores | blockignore | Excludes selected block types from the targeter. Multiple blocks can be listed by separating them using a `,` |
| coordinateyaw | cyaw | Sets the yaw value |
| coordinatepitch | cpitch | Sets the pitch value |
| blockcentered | centered | Boolean value. If set to true, the center of the block at the target location will be targeted, instead of the target location itself |
